Re: IML: Reverse Lens for 1966

[Christopher Hoffman <imperial67@xxxxxxxxxxxxx>]

The lenses should have a year marking on them (indicating the first year of
production for that lens), as well as a model fitment. 67 Imperial lenses
would say "67Y" (Y for Imperial), and they are about 4" wide by 1" high,
with a screw hole at 9 o'clock and at 3 o'clock. '68 Imperials use the same
lenses, so they also say 67Y.

'66 Imperial backup lenses say "65D" on them because they are actually '65
Dodge lenses, as noted earlier. They did not change the mold to add 66Y.

There should also be a part number molded into the lens. If you tell us
what's "written" on the lenses, maybe we can match up what they are for.

-- 
Chris in LA
67 Crown
78 NYB Salon




On 1/16/05 6:09 pm, Jon Ricketson (jcricketson@xxxxxxxxxxx) wrote:

> Thanks Chris for the clarification - that makes lsense.  So, I now wonder
> what I bought.  They are very similar to the rectangular bumper 65 lenses
> but are square cornered and do not indicate left or right - they are
> symetrical so can work on either side.  I wonder if these were used on the
> '67????
> Jon



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm