That's good to know, Mark! At $555.00, that kit is very affordable. I'd love to install one on my KImperial. This is a "load leveling" system rather than a full blown "air ride" system as it employs a hybrid of conventional springs and air bags to help level the load. This would be a very interesting project to tackle! Please quote this message in your reply. Otherwise I will be unable to reply to your message. Thanks. ----- Original Message ----- From: "Mark Swingle" <mark.swingle@xxxxxxxxxxx> To: <mailing-list@xxxxxxxxxxxxxxxx> Sent: Wednesday, December 08, 2004 5:49 AM Subject: RE: IML: 1990 Imperial ABS Retrofit I too used a Dynasty for parts. I found a 90 since my Imperil was 90, but they are all similar most likely. For new parts you can use: http://www.strutmasters.com/chrysler/index.htm But they are expensive as previously mentioned. Mark 90 Imperial ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm