IML: KYB Shocks

["Eric" <gearhead@xxxxxxxxxxx>]

***What exactly needs to be ground down on the KYB's to fit?***

You can read about this on this site, 
http://www.imperialclub.com/Repair/Springs/shocks.htm

It is most the way down the page. The lower bushing inner barrel needs about 
.25'' taken off of it. Also, be sure to read the installation write up, here
http://www.imperialclub.com/Repair/Springs/install.htm

Eric
Portland, Oregon 



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm