RE: IML: Rear Brake Drums on a 61 Crown

["B & T Roddick" <1roscoe@xxxxxxxxxxxxx>]

Is this the same type tapered rear axle shaft and interference fit hub as on
a '64???

If so, use the correct tool and, as Paul said, apply a (pneumatic) impact
wrench to the (well greased) forcing screw.  It WILL come off.  Take all
safety measures, as it can come off with a "bang".

Bill & Tami Roddick
'64 Imperial Crown 
'72 'Cuda 340
'88 Cherokee Laredo
'95 Concorde
 

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of RandalPark@xxxxxxx
Sent: Wednesday, October 27, 2004 6:56 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: Rear Brake Drums on a 61 Crown

I would buy the air compressor and use an impact wrench before I tried this.


Paul




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm