'66 Coupe interior wood removal -- attack from the rear?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

'66 Coupe interior wood removal -- attack from the rear?



I believe that the metal plates are bolted to the dash. Those bolts are not 
very accessible.

Paul

In a message dated 9/10/2004 1:47:38 AM Eastern Daylight Time, "David Whitney" 
<david.whitney@xxxxxxxxxxxx> writes:

>
>That better be one hell of a solvent if it goes through the metal and into
>the wood.  I don't want to separate the wood from its backing.  I'm talking
>about dissolving the glue that holds the metal plate to the dash.  In
>addition, if I can make large enough holes behind the plate then maybe I
>can push it out rather than prying around the edges from the front.
>
>-- David
>
>
>                                                                               
>                                                                
>                      Christopher Hoffman                                     
>                                                                 
>                      <imperial67@xxxxxxxxxxxx        To:       
> <mailing-list@xxxxxxxxxxxxxxxx>                                               
>                      t>                              cc:                     
>                                                                 
>                      Sent by:                        Subject:  Re: IML: '66 
> Coupe interior wood removal -- attack from the rear?             
>                      mailing-list-owner@imper                                 
>                                                                
>                      ialclub.com                                             
>                                                                 
>                                                                               
>                                                                
>                                                                               
>                                                                
>                      09/09/2004 10:05 PM                                     
>                                                                 
>                      Please respond to                                       
>                                                                 
>                      mailing-list                                             
>                                                                
>                                                                               
>                                                                
>                                                                               
>                                                                
>
>
>
>
>Any solvent might soak past the glue into the wood and damage it. I'd try
>heat before chemicals... Just my $0.02...
>
>Chris in LA
>67 Crown
>78 NYB Salon
>
>On 9/9/04 9:43 pm, David Whitney (david.whitney@xxxxxxxxxxxx) wrote:
>
>> So what solvent is the right one for this glue?
>
>
>
>-----------------  http://www.imperialclub.com  -----------------
>This message was sent to you by the Imperial Mailing List. Please
>reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
>shared with everyone. Private messages (and attachments) for the
>Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
>To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
>
>
>
>
>
>
>
>-----------------  http://www.imperialclub.com  -----------------
>This message was sent to you by the Imperial Mailing List. Please 
>reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
>shared with everyone. Private messages (and attachments) for the
>Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
>To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
>


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.