1961 Transmission question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

1961 Transmission question



In a message dated 30/08/2004 22:07:18 GMT Standard Time, JosephStil@xxxxxxx writes:
Question:
What could cause this problem?  I have already heard the following suggestions:  1)  the push button for reverse is not actuating the cam/control cable to shift in to reverse gear, 2) the reverse band could be broken (first & reverse are actuated by the same gear?), or 3) a valve body problem.

Any one of you have any suggestions on this?  If it is one of the three suggestions above, what am I looking at in terms of a) fixing it myself (remember, Dick Benjamin is my idol, but I haven't anywhere near the skillset he has), or b) the cost of repairs if done by a transmission mechanic.
Any of the above could be the problem. One thing you have not mentioned but is also a possibility is a dislocated reverse band strut. This can be repaired without a complete teardown and rebuild but would need the the removal of the valve body to access the strut.
 
If I was buying this car, I would assume the worst and expect to have to rebuild the transmission. If you have to send it to a shop for repair, expect a hefty bill. This is an iron torqueflite and rebuild kits are not cheap. Bear in mind that once they open up a forty year old transmission they are likely to find other problems too.
 
Best wishes,
 
Tony V.
(Reverse band broke last year) )


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.