Mix the color in the epoxy and heat it up just a little (so it get more liquid), then it will be easier to fill the cracks. Teddy / Sweden -----Ursprungligt meddelande----- Från: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] För lillyvine Skickat: den 5 augusti 2004 09:51 Till: mailing-list@xxxxxxxxxxxxxxxx Ämne: Re: IML: Steering Wheel Repair Hi . I received this information from Arran Foster about steering wheel repair...This is a copy of the email and web site.. On Aug 4, 2004, at 9:46 PM, GeoNort@xxxxxxx wrote: > Hello All; > Someone has brought up the subject of steering wheel repair again so > I thought that I might share this site with you. > http://www.halcyon.com/smiles/repairs.html > He uses silicone molds and appropriately died marine epoxy to repair > cracks > and chips in old plastic radio cabinets. When I ran across this I > immediately thought thjat it would be a practical way to repair cracked > steering wheels as well as reproduce knobs and other similar plastic > pieces. > Best Regards > Arran Foster > 1954 Imperial Newport > Needing A Left Side Tailight Bezel and other trim parts. [DEFAULT] BASEURL=http://www.halcyon.com/smiles/repairs.html [InternetShortcut] URL=http://www.halcyon.com/smiles/repairs.html Modified=20EEA451ADB0C30124 > Hi List, > The steering wheel on my 64 LeBaron needs some minor crack > repair. Has anyone done this repair before and what did you use to > fill in the cracks? Any special requirements for the finish paint? > Any info would be appreciated. > George > > 1964 Lebaron work in progress > 1963 Parts Car. > >