Yes, we have a number of auto upholstery
supply houses in the LA area, but the only nationwide chain I have personally
used is “Keyston Brothers”. Not knowing where you
live, I can’t find the closest one for you, but you can do it on Google,
or ask your upholstery guy where he gets his supplies. You’ll need
other stuff also, like hog rings etc. Since you have an original seat to
pattern after, you can just copy the way the original supplier built the seats –
it ain’t rocket science!
Dick Benjamin (who has done both)
From:
mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On
Behalf Of Roger Casagrande
Sent: Sunday, July 25, 2004 6:14
PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: Need cure for
"yellow dandruff'
Thanks for the guiding light based on your experiences. I've
already completed the "Dikes" step and the old seat covers are at Ron
Fryer's. The foam appeared to about 1" thick and was behind the seat cover
and in fact was sewn-in onto cardboard backing at the fabric-to-leather stitch
areas on both the bottom cushions and the seat backs. The other padding was
also about an inch thick with bulk batting around the corners of the front seat
back cushion. I've taken pictures as I was disassembling the seats.
Now I ask for a source for good latex foam. On the internet
there are several manufacturers, but they seem to concentrate on selling foam
mattresses and thin pads. Do you remember the sources available to you when you
did that to your autos?
----- Original Message -----
Sent: Sunday, July 25,
2004 6:40 PM
Subject: RE: IML: Need cure
for "yellow dandruff'
No, there is no easy way.
However, the repair job is not difficult – I’ve done this repair to
many of my cars. The seat covering is held on with hog rings, so
you’ll need a pair of good diagonal cutters (known to the trade as
“Dikes”) to cut off the old rings, and a pair of hog ring
pliers (available at an upholstery supply house) to put the new ones on.
You’ll also need some replacement foam. There are various
qualities, get the best they have, and you can shape it with an electric
carving knife. Probably the right thickness will be 3 inches, which
you will cover with some white fuzz for a little more comfortable feel.
The white fuzz is basically the modern equivalent of horsehair – it is
resilient and very durable. It comes in 24 inch wide sheets which they
will roll off a larger roll for you, it is very cheap. You’ll
be amazed at how much better the seat feels. If the burlap is shredded
(it protects the bottom of the foam from the metal springs), you’ll need
to replace that too. Just copy the way the seat was originally made, then
hog ring the covering back in place and you’re done!
From:
mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]
On Behalf Of DONALDDICKINSOND@xxxxxx
Sent: Sunday, July 25, 2004 10:53
AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: Need cure for
"yellow dandruff'
I am continually cleaning up residue on my burgundy carpet
that looks like "yellow dandruff." In reality it is urethane
foam particles from my seats. The foam is getting hard and brittle from
age and I was curious if anyone has found a way to slow or stop this aging
process short of a complete seat redu.
Don Dickinson
Prospect, KY
1955 Imperial Newport,
Canyon Tan and Desert Sand
1967 Imperial Custom Convertible, Ivory and Burgundy
