Replacing parking lights on a 90s Imperial?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Replacing parking lights on a 90s Imperial?



In the '92 FWD Car "Electrical, Fuel & Emissions".  Section 8L ("lamps")
page 8L-11 - "Park, turn signal lamp or bulb" - AC/D body (I thought
Imperial was "Y", no idea what "D" is, - but "C" is New Yorker).
----- Original Message ----- 
From: "Laurent Daudelin" <laurentdaudelin@xxxxxxxxxxx>
To: "Imperial Club" <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, July 02, 2004 9:22 PM
Subject: Re: IML: Replacing parking lights on a 90s Imperial?


> on 02/07/04 20:58, jsadowski at jsadowski@xxxxxxx wrote:
>
> > I seem to recall reading that this job requires dealer service.
> > John
> > ----- Original Message -----
> > From: Dave Grove
> > To: mailing-list@xxxxxxxxxxxxxxxx
> > Sent: Friday, July 02, 2004 5:17 PM
> > Subject: Re: IML: Replacing parking lights on a 90s Imperial?
> >
> >
> > According to a picture in the '92 service manual, - the parking lamp
assy's
> > are attached to the front bumper fascia.  Is this the case?
> > If so, - then it states to remove the lamp assy (I assume there are
> > fasteners of some sort there, - probably a couple of those "torx"
things),
> > from the bumper, then remove the socket & bulb from the lamp assembly,
and
> > "replace bulb if necessary".
> >
> > Regards,
> > DaveG.
> > ----- Original Message -----
> > From: "Laurent Daudelin" <laurentdaudelin@xxxxxxxxxxx>
> > To: "Imperial Club" <mailing-list@xxxxxxxxxxxxxxxx>
> > Sent: Friday, July 02, 2004 7:48 PM
> > Subject: IML: Replacing parking lights on a 90s Imperial?
> >
> >
> >> I know it might sound a little stupid and I'm a little ashamed to ask
this
> >> question here, but what is the best way to replace the parking light
bulbs
> >> on a 90s Imperial? They're almost impossible to reach from underneath
the
> >> car and positively impossible to reach from the top. The only way I can
> >> guess would be within the headlight area. But there is some kind of
lining
> >> held in place with some kind of plastic tabs and trying to remove it
would
> >> surely destroy the tabs.
> >>
> >> Any idea for such a simple task?
> >>
> >> Thanks in advance!
> >>
> >> -Laurent.
>
> Really? Replacing these bulbs would require dealer service?
>
> Dave, in which section of the manual are they describing the procedure?
>
> -Laurent.
> -- 
>
============================================================================
> Laurent Daudelin   AIM/iChat: LaurentDaudelin
<http://nemesys.dyndns.org>
> Logiciels Nemesys Software
mailto:laurentdaudelin@xxxxxxxxxxx
>
>
>
>


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.