starting 63 413

["Brian Shea" <bshea@xxxxxxxxxxxxx>]

kearny new jersey near newark airport  &nyc.

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of Bob Kinker
Sent: Thursday, February 26, 2004 4:28 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: FW: starting 63 413


Where arew you located?
----- Original Message -----
From: "Brian Shea" <bshea@xxxxxxxxxxxxx>
To: "Mailing-List" <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Thursday, February 26, 2004 5:31 PM
Subject: IML: FW: starting 63 413


> I connected the ballast almost wants to start but will not fire.What is
the
> plug # for a 413?If I get it started,does  anyone want this motor?
>
> -----Original Message-----
> From: Brian Shea [mailto:bshea@xxxxxxxxxxxxx]
> Sent: Monday, February 23, 2004 8:03 AM
> To: Mailing-List
> Subject: starting 63 413
>
>
> I turned the motor over by hand, put a new battery in it,and it turns over
a
> little slow and wont fire.I noticed 2 wires that were chewed on the fire
> wall.They look like they were connected to
> two white resistor looking things.Are these ballast resistors,and would
thi
> have an effect on the spark.The points are set perfectly.
>
>
>