Paul, Are you sure Autolite # 75's will work in a 413 -440? I
use # 85's in my cars.
John
----- Original Message -----
Sent: Thursday, February 26, 2004 5:06
PM
Subject: Re: IML: FW: Plug Number 63
413
I just looked up the plug numbers yesterday. In Autolite it
is "75". I have the Champion number too, RJ12YC or RJ14YC.
Paul
In a message dated 2/26/2004 5:31:21 PM Eastern Standard
Time, bshea@xxxxxxxxxxxxx
writes:
> > > I connected the ballast almost wants to
start but will not fire.What is the > plug # for a 413?If I get it
started,does anyone want this motor? > > -----Original
Message----- > From: Brian Shea [mailto:bshea@xxxxxxxxxxxxx] >
Sent: Monday, February 23, 2004 8:03 AM > To: Mailing-List >
Subject: starting 63 413 > > > I turned the motor over by
hand, put a new battery in it,and it turns over a > little slow and wont
fire.I noticed 2 wires that were chewed on the fire > wall.They look
like they were connected to > two white resistor looking things.Are
these ballast resistors,and would thi > have an effect on the spark.The
points are set perfectly. > > > >
----------------- http://www.imperialclub.com
----------------- > This message was sent to you by the Imperial Mailing
List. Please > reply to mailing-list@xxxxxxxxxxxxxxxx
and your response will be > shared with everyone. Private messages (and
attachments) for the > Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx >
To UN-SUBSCRIBE, go to > http://imperialclub.com/unsubscribe.htm
-----------------
http://www.imperialclub.com
----------------- This message was sent to you by the Imperial Mailing
List. Please reply to mailing-list@xxxxxxxxxxxxxxxx
and your response will be shared with everyone. Private messages (and
attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To
UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
|