auto bodywork...RUST

["Quint Villanueva" <Qlv@xxxxxxxxx>]

After sanding and cleaning, apply POR 15.  It is readily available in auto
parts stores.  I don't know who manufactures it but it works.
Another thing I learned recently is that Rustoleum contains a rust inhibitor
(fish oil) that is very effective.

                                                Quint
----- Original Message ----- 
From: "Jan Harmonson" <jharmonson@xxxxxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Monday, February 16, 2004 7:58 AM
Subject: Re: IML: auto bodywork...RUST


> Hi
>
> I have seen reference to "killing rust" several times. If sanding clear to
> bare, clean metal is not reasonable what can be best  used to kill the
> rust?
>
> Jan
> ----- Original Message ----- 
> From: "Kerry Pinkerton" <Pinkertonk@xxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Monday, February 16, 2004 10:00 AM
> Subject: Re: IML: auto bodywork...RUST
>
>
> > bom tie wrote:
> >
> > >I wanted to see if anyone has a comment about this process...
> > >http://www.rustbusters.com/
> > >
> > >Looks way cool, big time saver and all metal
> > >
> > >
> > >
> > It will replace the metal for you to lay in bondo but it won't kill any
> > rust.  That is the fallacy.  If you want to have a good replacement, you
> > MUST kill or remove all rust.  If you just replace metal where the
> > cancer is, it will simply rust out around the new metal.
> >
> >
> >