Coupe Window Motors
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Coupe Window Motors



Oops, I see that the original post said that windows were bigger...sorry folks!

Paul

In a message dated 2/6/2004 8:53:30 AM Eastern Standard Time, 
creesto@xxxxxxxxxx writes:

> 
> 
> Gang: I found a guy listing many '66 parts. They are all for a 1966 four
> door and I own a '66 Coupe. There are 4 window regulators for sale that
> include the window motor and my question for you guys is:
> Even though the windows in a 4 dr. are smaller than those in my coupe, are
> the window motors the same? Some of my motors seem very tired and would love
> to get them up to speed for the approaching warm weather...
> 
> And another thing: I was working on my other classic car, replacing the
> valve cover gasket, and as I was gently tightening down the bolts, one of
> them snapped off. I was quoted at least $65 to drill it out and re-tap it.
> My question for the list is: can I do this myself? FYI, ;the engine is an
> inline 6, 170 ci with 8 bolts holding on the cover. My thinking is this: for
> that much money, I could buy a nice tap set and be ready for the next time
> this happens on the same car or on my '66 Imperial Crown  Coupe.  Advice
> from those in the know, please!!
> 
> Thanks!
> Chris Lynch
> 1966 Imperial Crown Coupe
> 1962 Comet
> 1986 Fleetwood Brougham
> 
> 
> 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.