B/U LIGHT SWITCH 66'.CPE.

["mail.charter.net" <salsender@xxxxxxxxxxx>]

Some switches are adjusted by placing a small gauge drill bit, usually
marked numerically not necessarily  fractions, such as a #43 drill bit size
for example, in the B/U switches adjusting hole. You generally place the
shift lever in Park or Neutral, place the drill bit in the adjusting hole
until it sets a predetermined depth, once the drill bit has seated properly,
secure the B/U light switch. Some B/U switches on the columns are loosely
mounted and slide to adjust, you place the shift lever in park or neutral,
shift to reverse, check B/U lights, and if ok secure the switch.
Kent
67 Imperial 4dr ht
----- Original Message -----
From: <imperialdrivein@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Thursday, November 20, 2003 9:10 PM
Subject: IML: B/U LIGHT SWITCH 66'.CPE.


> Hi All,I am trying to get my Back-up lights to function.They light up
> while shifting from rev.to park but wont stay on in rev.I located the
> switch under the steering column and dont know how to adjust it.Or do i
> have to replace it. Imperially  ,  Gary
>
>
>