Mark
Hillman fasteners has these. Call around to some of the hardware
stores in
your area and ask if they stock Hillman fasteners. If so chances are
they have
them in stock.
Ed Noble
1969 IMP
1971 IMP
Other Mopar stuff
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Saturday, June 21, 2003 1:29
AM
Subject: IML: 1970 fasteners needed
Okay, this is for a '70 New Yorker-- but hey, a New Yorker is
really an
un-gussied up Imperial! And I think the same fasteners were
used on
fuselage Imperials.
These are used to hold sound deadening
& insulating material inside the
passenger compartment onto the
firewall. They're made out of black
plastic and are about 2"
long. They sort of look like screws, but you
don't screw 'em in, you
push 'em in. They are designed to push in but
not pull out. The
first 1" is smooth, then the next inch has ribs on it
(please, no jokes)
designed to hold it in place. The head is a flat
circular disc of
plastic and has a hole in the center.
Anyway, I was removing some of
this padding and broke a couple of these
fasteners. The autoparts
stores here ain't got 'em.
Anybody have any? Or know of a source
for them?
Muchas gracias, Mark M
-----------------
http://www.imperialclub.com
-----------------
This message was sent to you by the Imperial Mailing
List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx
and your response will be
shared with everyone. Private messages (and
attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To
UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
|
Back to the Home of the Forward Look Network