auto temp II
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

auto temp II



Do yourself a favor and save the headache of messing with that thing. It's a crappy situation alltogether with these units. I have parts from three of these things....and not a one of them is any good. If you really wanna get the unit working....first get the good servo. I have never bothered to get one..but I cope. Still have heat ...  Just ask yourself how bad you want the thing to work. Then spend the money accordingly. If you bypass the servo..you will have heat.(if the vaccum circuits are good) Luckily in HI DEF....I have a blower. The car gets really really toasty. I know one thing, these cars should have all had rear heat/def. I don't ...wishing I did. Maybe I will put it in someday. (maybe)
 
Will
 
----- Original Message -----
From: Robin Giesbrecht
Sent: Wednesday, June 04, 2003 1:47 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: auto temp II
 
Ongoing saga of auto temp II in a 72 Imperial. It worked fine when I bought
it about a year ago. But then the body cracked. Found another on a Mercedes
at the junkyard. Could not believe it. So slapped that one on. Well it did
not leak and since it was winter warm air was fine. I then disassembled the
original and discovered it is not that complicated at all. The inners of the
original were in like new condition. Then I pulled the one from the Mercedes
apart as it would not give me any cold air. Well the insides of this one
were a complete disaster.Corrosion everywhere. Got moisture inside it
somewhere along the way. OK. Swap innards from original over to the Mercedes
body. Great. Now it makes cold air but will not blow except for a short
blast after I switch it from Hi Def. Also when the switch is selected to Lo
auto or Hi Auto there is a definite vacuum hiss coming from the selector
unit. I had this out also but not much you can do with it. Anyone have a
spare or know of a junker that could donate one? I think that might be my
problem. Any other ideas? I know a new aluminum servo would be nice but
money is tight right now.

Robin Giesbrecht

_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.
http://join.msn.com/?page=features/featuredemail



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.