<<<<<<<<<Jay wrote:
after a new (junkyard) distributor, a new (junkyard) electronic
ignition module, and a new muffler ..........................the temperature
gauge and the oil pressure gauge both peg whenever the key is on. >>>>>>>>>
Jay, if this happened right after the other work was done, it's possible
that
the wires to the temp and oil pressure senders have gotten pinched, or
rubbed
bare, and are grounding out. Check the
wires from each of these senders back
to the cluster to make sure they aren't
grounded.
Regards
Michael
Roger and Michael in San Diego
67 Crown Convertible "Moby"
73 LeBaron Coupe "La Bomba"
56 Sedan
Back to the Home of the Forward Look Network