you have the original disk brakes??
what is the diameter of the rubber disks which you need? I'm thinking one
inch but haven't had mine apart for a while. Are you adjusting the self
adjusting setup correctly? Took me a while to understand it when I worked
on mine a number of years ago and it pulled and tried to lock up also.
Anyway the cups shouldn't be a big deal at any parts house. At least those
around here stock an assortment of all normal diameters. Of Course yours
may be in the dreaded metric sizes and be a problem.
----- Original Message -----
From: "Ray from The Old Crocs" <mail@xxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Sunday, April 13, 2003 4:48 PM
Subject: IML: Urgently needed for 1950 Imperial
>
> Hi Guys
>
> Ray Gomm from the UK here - I urgently need a full set of wheel cylinder
> rubbers for 1950 Chrysler Imperial ( New Yorker chassis ) - 2 for each
> front wheel and 1 for each rear wheel - looks like I'm going to have to
> replace everything to find the problem :
>
> My front brakes grab one-sided so that the car always pulls violently to
> the right when braking. I stripped everything down, cleaned it all and
> put it back but it still does the same - can't see anything obvious.
> Helppppppppppppp !
>
>
>
>
>
>
Back to the Home of the Forward Look Network