Differences between 67 and 68 Crown

[Christopher Hoffman <imperial67@xxxxxxxxxxxxx>]

Title: Re: IML: Differences between 67 and 68 Crown

Since I'm not sure if you need stuff for the interior, exterior or under the hood, I'll give a brief rundown on major differences... These are things that ARE NOT the same between 1967 and 1968.

• Front fenders (in fact, all front-end sheetmetal/trim/chrome other than the hood)
• Dash pad
• Inside door handles
• Exterior door handle inserts
• Fuel filler cover
• Upholstery pattern
• Most radios
• AutoTemp (68) vs manual A/C (67)
• Inside mirror
• Bronze (68) vs walnut (67) interior trim
• Headlamp dimmer sensor and housing
• Side mirror placement
• Side spears (and the holes/studs therefor)
• Other minor stuff
  

The rest is fairly interchangeable...

Hope this helps a little.
Chris in LA
67 Crown
78 NYB Salon


Don Savard (res03r3f@xxxxxxxxxxx) wrote:

> Hi all,
> Looking at inner door panels,interior trim(excluding wood/brass) and
> outside trim (side body mldg below belt line that goes from front of
> doors,on doors and to rear bumper) It all "looks" like it will
> interchange,but will it?? I found a 67 Crown that's got a lot of the
> stuff I need for my 68 Crown-both 4 doors.
> Thanks
> Don Savard