83 HSP replacement

["Neil Thorpe" <nt014b6628@xxxxxxxxxxxxxxxx>]

Leo,

 

The EGR valve (one only) is under the pax side of the HSA bolted to the inlet

manifold with two nuts that require a 1/2" socket (or 13mm).

 

You will only be able to see the EGR valve after you have removed the air cleaner

housing, it is below and inboard of the point that the breather hose is connected

to the air cleaner housing.

 

You can plug the vac hose going to the EGR and see if it makes any difference to

drivability once the engine is warm.

 

The EGR valve is removable without removing the HSA if you own the wobble type

extensions for a 3/8" drive socket set a good aim and plenty of time and luck.

 

Neil 82 Imp

London England

----- Original Message -----

From: Leo Heligas

To: Imperial Club

Sent: Thursday, January 16, 2003 4:26 PM

Subject: IML: 83 HSP replacement

On my previous Post I forgot to ask where in the H--- the EGR valves are.A mecahnic friend says there are two of them on this beast. Do I need to replace both of them or just one? The FSM is absolutely no help!

Thanks again.

Leo H. Drowned 83