CJ's have 5 1/2" bolt pattern which is the same as half ton Ford. I beleive
the Imps changed the bolt pattern when the budd brakes came into play in 67.
Then they had 5" pattern. Buick and some chevy trucks fit.
Brian
----- Original Message -----
From: "Don Nonnweiler" <dnonnwei@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Thursday, January 02, 2003 4:07 PM
Subject: Re: IML: IML - DIGEST POSTING
> I have used Jeep wheels off a 1977 CJ7 on my 1965 Imperial so I would
> imagine other years will work
> Don
> 59 Crown
> 56 2dr hopefully soon
> ----- Original Message -----
> From: "Tristan Moore" <v-2tmoor@xxxxxxxxxxxxxxxxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Thursday, January 02, 2003 5:17 PM
> Subject: RE: IML: IML - DIGEST POSTING
>
>
> >
> > In response to the discussion about wheel rims that will fit the 67
> > Imperial, I think it would be great if someone would make up an
> interchange
> > chart for imperialclub.com or at least post a list of all wheels that
will
> > fit. I might be convinced to keep my budd brakes if I actually had a
spare
> > wheel. I really only have 3 good rims, one has a small leak through the
> > steel. I have been planning to mig weld it, but that might not work. I
> need
> > something better than the wheels I have, and I'm probably going to go
the
> C
> > body direction, because there are tons of regular dodge wheels around,
> both
> > aftermarket, and stock. One modification to the 67 that I didn't mention
> > before is, I plan to somehow get rid of the fender skirts, and widen the
> > rear fenders a bit so I can get 12 inch rims under the car.
> >
> > Cheers
> >
> > Tristan
> >
> >
Back to the Home of the Forward Look Network