Too high, allowing it to flood, but just slightly.
Brian
> > Also might want to check float levels in carb. I had
> > a secondary float out
> > of adjustment on my 67, it would not idle well, but
> > ran fine off idle. When
> > shutdown warm, you had to do the put the pedal to
> > the floor trick to get it
> > going again. Adjusted the float and no more problem.
>
> Were the floats too high (allowing too much gas into
> the bowls) or too low (not enough gas)?
>
> =====
> --Mike Pittinaro
Back to the Home of the Forward Look Network