bent torsion bar

[Thad <gentrysgarage@xxxxxxxxx>]

Robert what shape is you lower control arm bushing and
is the lower control arm securely mounted...please
check these!
Thad the ImpPoster

--- Robert Hanekamp <bobsmopar@xxxxxxxxxxxxxx> wrote:
> Hi.
> It is bowing side ways and I do have 2 extra bars.
> It did this before I drove the car.
> Thank you for your help.
> Bob
> ----- Original Message -----
> From: "D. Dardalis" <dardal@xxxxxxxxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Saturday, June 29, 2002 9:02 PM
> Subject: Re: IML: bent torsion bar
> 
> 
> > Is it bowed upwards?  Did it happen by running
> over a rock or something on
> > ground?  How much is it deflected by?  1 inch, 6
> inches?
> >
> > Its probably a good idea to find a replacement
> (won't be easy).  Question
> > is, should you drive the car till you find one? 
> How long has it been like
> > that?
> >
> > D^2
> >
> > At 09:21 PM 6/29/2002 -0500, you wrote:
> > >Hi all.
> > >I need to ask a question about the torsion bars.
> > >On my 68 Imperial the right one is straight and
> the left one has a bow in
> > >it.
> > >Should I take it out and put in a another one.
> > >Thank you for any help on this.
> > >Bob
> > >
> > >
> > >
> > >-----------------  http://www.imperialclub.com 
> -----------------
> > >This message was sent to you by the Imperial
> Mailing List. Please
> > >reply to mailing-list@xxxxxxxxxxxxxxxx and your
> response will be
> > >shared with everyone. Private messages (and
> attachments) for the
> > >Administrators should be sent to
> webmaster@xxxxxxxxxxxxxxxx
> > >To UN-SUBSCRIBE, go to
> http://imperialclub.com/unsubscribe.htm
> >
> >
> >
> >