Mike; Congratulations on your conversion job, it must feel a lot safer driving Silver with some actual metal between the callipers. I was quite impressed by the research you did before having the job done. After reading your article the first time around I was convinced that the conversion was feasible before you even found a machine shop to do the work. As I recall there were a few naysayers telling you that it couldn't work, that it was dangerous, that it shouldn't be done. It seems that they were content to have you and everyone else with a 67' or 69' Imperial roaming the highways with inadequate brakes or park your car permanently. Still some believed that you should blow a pile of money on some exotic aftermarket disk conversion rather then taking your more logical and affordable route. Through it all you persevered, carried out with what you had thought through and planned. In the end you were right, they were wrong, and everyone on the IML, with Budd brakes, is a winner. Now its my engine's turn for the machine shop. Best Regards Arran Foster 1954 Imperial Newport Needing A left Side Taillight Bezel and other trim parts. ----- Original Message ----- From: "Mike Pittinaro" <mechimike@xxxxxxxxx> To: <mailing-list@xxxxxxxxxxxxxxxx> Sent: Tuesday, January 29, 2002 7:09 PM Subject: Re: IML: Budd to Supra Conversion, web site up...with pics! > Replying to my own email...how bipolar of me! Anyway, > the pics are up, the URL is below, enjoy! > > > page; the photos are forthcoming (later tonight, > > hopefully, check back tomorrow, anyway) > > > > The URL is: > > > > www.angelfire.com/geek/ottotheresurrector > > > > Click on the picture of the brake rotor near the > > centre of the page to get to the discussion and > > pictures of the conversion. > > > > Happy stopping! > > > > ===== > > --Mike Pittinaro > > > > Christmas is over now > > So I'm changing my haiku > > Thank you, David Brown > > > > __________________________________________________ > > Do You Yahoo!? > > Great stuff seeking new owners in Yahoo! Auctions! > > http://auctions.yahoo.com > > > >