IML: Push-button illumination '61
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Push-button illumination '61



> From: Mark Battesby <a1web@xxxxxxxxxxxxx>
> Subject: Re: IML: my 1961 Imperial wirering burned up
>
> Another question. For five years now I have been trying to figure out > where the light source plugs into the push button heater controls. > That's the only area that doesn't light up. For the life of me I just > don't see how a light source attaches to those clear push buttons

If it's like my '62 and '63 were, there should be a grayish enameled metal plate alongside the pushbuttons inside the dash. That's the electroluminescent plate, one whole side of it should glow when powered.

   Don't touch the edge when there's power going to it!


      -Kle.
      '69 Crown 4DHT (plain old lightbulbs)

-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.