----- Original Message -----
Sent: Sunday, February 24, 2008 5:35
AM
Subject: Re: IML: 59 Imperial crown
starter boot?
Hi Tom and David,
Yep, the 59 and 60 starters are the same (and
quite hard to find these days..) and they do have a rubber boot over the
fork to protect the mechanism from moisture, dust etc.
I am still looking for a new boot too, but
without success so far.
Maybe Gary Goers have them? Since he is the
guy that duplicates lots of rubber Chrysler/Imperial parts he might also have
this item.
I will check his catalog, the reason that I
didn't do that earlier is the fact that Gary is not the fastest shipper in the
world....(to put it nicely :)
So if anyone on the list knows a source for those
rubber starter fork boots, please let us know!!
Rob
1960 Crown 4dr HT
----- Original Message -----
Sent: Sunday, February 24, 2008 12:51
AM
Subject: Re: IML: 59 Imperial crown
starter boot?
I believe the 59 and 60 starters are the same
and it does have a rubber boot over the fork. I couldn't find one when
I had my starter rebuilt.
Tom
60 Crown
----- Original Message -----
Sent: Saturday, February 23, 2008
6:03 PM
Subject: IML: 59 Imperial crown
starter boot?
I am rebuilding my 1959 Imperial Crown
starter. Does this starter come with a rubber boot to protect the solenoid
to starter gear fork? If so, does anyone know of a source for new rubber
boots? I bought an NOS boot for another Plymouth that I have and the
rubber ( being 46 years old ),
was very rigid. When I removed my starter
from the engine on the 59 Imp. it did not have any rubber.
Thanks,
David
Back to the Home of the Forward Look Network