The difference will be in top end speed. 3:23s will have better pulling power. and you may lose a little mpg. the 2:94 will have a higher top end speed. Not really good for towing a trailer. Great for road trips. ---- Chris Strohmeyer <chrisstroh@xxxxxxxxxxx> wrote: > Hi all and thx for all your responses, > > I am told that I won't find a NEW ring and pinion set in a stock 2.94 ratio. > I could try used. I was also told that a 323 ratio would be fine too. Would > this be true? I'd rather go with the factory ratio but if it makes little > difference why not go 323? Will it drop right into my 8-3/4" 742 case? > Would a 323 lessen the value of my stock car? > > Thanks, > Chris 67 Imperial Convertible > > > ----------------- http://www.imperialclub.com ----------------- > This message was sent to you by the Imperial Mailing List. Please > reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be > shared with everyone. Private messages (and attachments) for the > Administrators should be sent to iml.webmonster@xxxxxxxxx > To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm > ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to iml.webmonster@xxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm