|
hi,
If this is a fairly common problem and fits several years , we
could possibly make an injection mold I manufacture it .. I have
access milling an injection molding equipment,. I would need to hear from
more club members about possible quantities though. Let me know if there
is some interest.
Thanks
Russ
61impcoupe
In a message dated 2/13/2008 10:02:39 A.M. Mountain Standard Time,
imperialken@xxxxxxxxx writes:
I'm
usually pretty good about finding resources for parts and repair
stuff, but
today, I'm drawing a blank. (I'm sure it has a lot to do
with age, mine not
the Imperial's)
The driver side electric window on my 67 Crown quick
working recently.
I was able to move the window up and down manually so I
suspected the
plastic gear in the motor housing was broken. After
taking it apart
last night I discovered my suspicions were
correct.
I remembered seeing posts from other members regarding this
topic in
the past and the mention that repair kits were available at one of
the
major-chain parts houses like Kragen or Napa. Well I
unsuccessfully
searched Kragen, RockAuto, PartsAmerica and Napa. I
got nothing.
Then I searched the club web site looking for information
regarding
electric window repair and again I turned up nothing. I'm
sure the
information is there, it's just a user-interface issue. (me
the user,
not interfacing well with the computer)
Does someone with
a memory better than mine know where I can find that
little plastic
gear?
Thanks
Ken
67 Crown 4 Dr Ht
68 LeBaron 4 Dr
Ht
----------------- http://www.imperialclub.com
-----------------
This message was sent to you by the Imperial Mailing
List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will
be
shared with everyone. Private messages (and attachments) for
the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To
UN-SUBSCRIBE, go to
http://imperialclub.com/unsubscribe.htm
|
Back to the Home of the Forward Look Network