IML: Valve Cover Gaskets for Imperials with 413 Engines
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Valve Cover Gaskets for Imperials with 413 Engines



To The Group;

I found this website and listing of Felpro gasket sets for various cars.  The high temperature gaskets I had mentioned earlier are described here, but the specific p/n for the 413 does not show up.  Most likely you would need to call the company and discuss it over the phone to get the exact right part number.  These should be available from a number of auto parts houses as the 413/6.8L was used in other Mopar lines besides the Imperial.  The ones I obtained were the rubber coated fiber type.  See:
http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_746660_-1_10195

Also check with some of the companies that specialize in racing parts.  I hope this helps.

Joe
begin:vcard
fn:Joe Strickland
n:Strickland;Joe
adr;dom:;;1021 Vaughan Lane;Tioga;Texas;76271
email;internet:jwstrick426@xxxxxxxxxx
version:2.1
end:vcard



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.