Re: IML: 64 push button
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: 64 push button
- From: "Bigdog1\(P. Juliano Jr.\) list member" <bigdog1@xxxxxxxxxxxxxxxx>
- Date: Mon, 28 Jan 2008 11:24:56 -0500
If you need a good used 65 trans., let me know off line.....I have one from
an Imp.
Phil bigdog1@xxxxxxxxxxxxxxxx
----- Original Message -----
From: "John Birkhead" <daehkrib@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Sunday, January 27, 2008 2:52 PM
Subject: IML: 64 push button
I have a 65 crown and I was curious as to how hard it would be to make it
a push button transmission. Would it just be adding the 64 push button and
using the same transmission that is already in the car or do I have to
swap out the transmission also. Any ideas and input would be appreciated.
John
65 Imperial (being slowly restored)
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to
mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with
everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network