>backed the balancer
off. No problems. I just found out that my block and heads are not cracked
which was good news. My engine had >water in the oil and so far have not found
the source or leak for the water. I am wondering whether to have another
machine shop test >them again. I would
hate to completely rebuilding the engine only to discover that there is still
a small crack somewhere. Someone >suggested that
I
haven?t ever had a machine shop miss a crack though I?m sure it is
possible. Were it mine I would go ahead and put it back together and
hope for the best.
>I replace the
oil pump with a higher pressure pump. Any thoughts on that? Thanks,
David
I always use the
high volume standard pressure Melling pump. The standard pump is fine
I?m sure, I just feel a little better with the high volume pump down here in
Sunny Florida when I?m idling in traffic for an hour.
Steve B.
