IML: Rust prevent in box frame
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Rust prevent in box frame



question:
I am replacing a section of frame rail. I built a box
frame to weld in, but I left it in the truck and it
got rained on (sad face), and it now has much water
inside my NEW frame!
Ok can I save it or just start over?
And when I do build a new one how do i keep it from
rusting from the inside?
I had a thought to drill a few holes and fill it with
WD-40 after it is all welded, and then maybe displace
with a foam. I know that foam-a-fill is not a good
idea because it is open cell foam and will hold
moisture (am I correct). Is there a closed cell foam
for this?


Charles Major
270.791.4139 Moble
208.728.4443 FAX


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.