Fwd: RE: IML: 1964 through 1966 Disc Brake Option with 800 HP 392 cu.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fwd: RE: IML: 1964 through 1966 Disc Brake Option with 800 HP 392 cu.



Hi John!...how would I calculate what the TOP SPEED and TOP RPM woould be for my '66 LeBAron with the stock 440 engine, 3.23 rear, stock 15in. wheels and dual exhaust? there's probably a formula for this. I'd appreciate you sharing that. Feel free to email me directly at "dansgarage@xxxxxxxxxxxxxx" if you'd prefere so we don't bore the rest of the IML.
Thanks a bunch!
Dan Melnik
=============
From: "John L. Chesnutt" <chesnutt@xxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Subject: RE: IML: 1964 through 1966 Disc Brake Option with 800 HP 392 cu.
Date: Tue, 11 Dec 2007 16:42:08 -0800

Hi Remco Van Lent.

What rear axle ratio do you intend to use? Because with the factory ratio you will not be able to make the 200 MPH mark. Run out of RPM. 

John Chesnutt, Portland, Oregon

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of REMCO VAN LENT
Sent: Tuesday, December 11, 2007 10:09 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: 1964 through 1966 Disc Brake Option

Not only the brakes should be updated when going real fast.
Also the complete suspension and the rest of the drive train needs a lot of 
work.
I live close to the german autobahn and will surely floor it when the new 
engine is ready to go.
What's the use of building a 800 HP +++ supercharged 392 and not use the 
power?
I hope to be able to hit the 200 MPH mark, not on a weekday's rush hour but 
on a early sunday morning with a almost
empty autobahn for myself.

----- Original Message ----- 
From: "PAUL WENTINK" <randalpark@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Tuesday, December 11, 2007 2:26 PM
Subject: Re: IML: 1964 through 1966 Disc Brake Option


 There was a
post about needing better brakes to get the most out of the engine,
which makes me wonder if some folks think that by converting their
brakes they can drive faster or follow more closely. Those are bad
driving habits which have nothing to do with realizing the potential of
the engine. Public roads are a community of people who have to work
together to get along. If someone wants to find out how fast their car
will go, they need to make arrangements with a race track, not
experiment with fast driving and a different braking system on a public
road. The excessive burst of power available to Imperial Owner's is
there for safe passing on two lane highways and smoothly merging with
high speed freeway traffic.

Paul W.


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm

=============


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.