Re: IML: Part Found/Number Problem

[PAUL WENTINK <randalpark@xxxxxxx>]

The only hose that I can think of for either car would be the the 
heater to heater control valve hose. It is pre-formed and short, but 
its bent more than 90 degrees, closer to 180. It goes to and from 
connectors that are next to each other on the fire wall. It sounds like 
a regular old and discarded bypass hose from a '60s GM or FOMCO product.

Paul
-----Original Message-----
From: YBSHORE@xxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx; mailing-list-owner@xxxxxxxxxxxxxxxx
Sent: Sun, 18 Nov 2007 4:30 am
Subject: IML: Part Found/Number Problem



Fellow Imperialist's:

 

    In moving my '55 NY and the '56 Imperial around my barn for 'winter 
positioning', I found on the floor whence they came what appears to be 
some kind of heater relief hose, in a 90 degree angle with a broken 
male lip which would appear to fit into an outlet as a sort of 
relief to something I just cannot locate on either car, as the other 
end seems to be 'open'.  I have searched the site for leads and am 
unable to pinpoint this piece, nor find this hard rubber piece 
mentioned on either home page.  The number on the piece is: 2521077 and 
linearly is about 4" long if I could straighten it.

 

    Thanks in advance for any help/leads...

 

Jack




------------------------------------------------------------
See what's new at AOL.com and Make AOL Your Homepage.


________________________________________________________________________
Email and AIM finally together. You've gotta check out free AOL Mail! - 
http://mail.aol.com

-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm