-------------- Original message --------------
From: "Chris Strohmeyer" <chrisstroh@xxxxxxxxxxx>
Thx Dave,Your solution makes the most sense. This is an ALTERNATOR car therefore no polarization required. I know about how to adjust the voltage regulator to 13.6 volts, which it was. It worked perfectly for a while but then did the same thing my old one did. I don't want to be filing the points quite that often and seems unusual for this to happen so soon. Maybe the contacts on the newer regulators are cheap and can't stand up to the job?Anyway, I have a solid state regulator on it's way for $25. that has the original looking cover on it. We'll see. Thanks for all the responses.Chris Strohmeyer67 Convertible----- Original Message -----From: sosmi@xxxxxxxxxxxSent: Monday, November 12, 2007 8:24 AMSubject: Re: IML: Fw: voltage regulator contacts burningIt may be possible the replacement regulators are set up to control the voltage at too close a voltage drop. If all connections are good, and clean and the battery is not "punky", you may have to remove the regulator cover, and do a minor bending and tweaking (FSM) explains it. If all else fails, a solid state type may be the next coarse of action. Dave.-------------- Original message --------------
From: "Chris Strohmeyer" <chrisstroh@xxxxxxxxxxx>
>
> ----- Original Message -----
> From: "Chris Strohmeyer"
> To:
> Sent: Sunday, November 11, 2007 11:10 AM
> Subject: voltage regulator contacts burning
>
>
> > What would cause this? They burn a little pointed shard across them and
> > they start sticking. I've tried a new regulator and the same thing. The
> > alternator was changed recently too.
> >
> > Thx,
> > Chris Strohmeyer
> > 67 Imperial Convertible
> >
>
> ----------------- http://www.imperialclub.com -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@ imperialclub.com and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to iml.webmonster@xxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>