Re: IML: Dented Oil Pan
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Dented Oil Pan



Tim, besides the pick-up being smashed against the bottom of the pan, the pick-up tube may be cracked at the threaded end in the block, causing the pump to suck air. Dave.
 
-------------- Original message --------------
From: Tim Durrer <tdkd99@xxxxxxxxx>

> The oil pan on my '73 440 has a sizable dent dead
> center on the bottom. I also have low oil pressure. My
> Dad seems to think the bottom of the pan may be
> pressed against the oil pick up screen. The pressure
> also seems to drop when the engine speed is increased.
>
>
> What do you guys think?
>
> Thanks,
>
> Tim Durrer
> 73 Blue Sky
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> ----------------- http://www.imperialclub.com -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing -list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to iml.webmonster@xxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.