IML: Converting to electronic ignition

From: Nick Conti <nickjconti@xxxxxxxxxxxxx>
Date: Tue, 30 Oct 2007 15:23:43 -0700 (PDT)

I purchased a conversion from Pertronix to convert my 66 Crown to electronic ignition. After installation the car refused to start. Tech help told me to bypass the resistor on the firewall which I did. The car will start but runs very rough and stalls if you remove you foot from the gas. Any help would be greatly appreciated.

Thanks in advance

Nick J. Conti

Follow-Ups:
- RE: IML: Converting to electronic ignition
  - From: DR CHALLENGER
- RE: IML: Converting to electronic ignition
  - From: Ken Lang
- Re: IML: Converting to electronic ignition
  - From: PAUL WENTINK

Prev by Date: Re: IML: Cooling system "cleaning"
Next by Date: IML: '55 6 Volt A/C Condenser
Previous by thread: Re: IML: Cooling system "cleaning": filter's
Next by thread: Re: IML: Converting to electronic ignition
Index(es):
- Date
- Thread

Back to the Home of the Forward Look Network

Copyright © The Forward Look Network. All rights reserved.
Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.