Re: IML: Electronic Ignition
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Electronic Ignition



You can get a kit to change the advance curve of your distbutor it consists of new springs also have you had your timing chain replaced ? if not I  would and use a duble roller .

----- Original Message -----
From: Geoff Fors <wb6nvh@xxxxxxxx>
Date: Tuesday, October 9, 2007 22:20
Subject: IML: Electronic Ignition
To: mailing-list@xxxxxxxxxxxxxxxx

> One of the reasons I was thinking about converting to electronic
> ignition on
> my '67 is that the Mopar Direct-Connection style electronic ignition
> conversion kit has an adjustable vacuum advance.  I have a
> terrible time
> with pre-detonation (pinging) even with supreme brand gasoline
> and retarding
> the timing isn't a very satisfactory solution, particularly
> considering  how
> far it has to be retarded.  I have tentatively determined
> that the pinging
> is caused by the vacuum advance curve being too aggressive for
> today's fuel.
>
> I have already converted the heads to unleaded and don't want to
> replacepistons and head gaskets in a project to lower the
> compression, so I am
> looking at distributor advance solutions.
>
> What have others done regarding the predetonation issue?
>
> Geoff
> Monterey CA
>
>
> -----------------  http://www.imperialclub.com  -------
> ----------
> This message was sent to you by the Imperial Mailing List.
> Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to iml.webmonster@xxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.