Frank,
Even though you jiggled the turn signal switch with no positive
results, it does not rule out the switch. If a wire broke off the TS
switch, jiggling it would have no effect. To me, your description of the
problem points directly to the TS switch.
Ken
67 Crown 4 Dr Ht
68 LeBaron 4 Dr Ht
From:
mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Bob
Sent: Thursday, August 30, 2007 7:17 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: 61 Brake Lights, I am stumped
Take
a test light and see if you have power to bulb when brakes are applyed.
-----
Original Message -----
Sent: Thursday, August 30,
2007 8:56 PM
Subject: IML: 61 Brake
Lights, I am stumped
I went to get my inspection sticker and found out I don't
have brake lights. I have power to the brake light switch. I tried eliminating
the switch and connected the switch leads, still no brake lights. I know the
bulbs are good because I have turn signals and running lights and all the
fillaments are good and light. I cleaned the sockets and ground path in
taillights. I tried wiggling the turn signal switch while applying the brakes
to see if the switch was going bad but that didn't change anything. I am
stumped and don't know where else to look, any suggestion are welcome as I am
at my wits end.
|
