IML: Lean Burn Box

["Thomas A.Nedelka" <eesigns@xxxxxxxxxxx>]

I am looking to buy a lean burn box, working or not (I can have it rebuilt) for my 78 NYB.  The Chrysler part number, both from catalogue and the existing box, is #4111278.  A local parts person ran my vin# and verified it as a car made for Canada with no Cat, 400-4bbl.  The car gets no timing advance at or slightly off idle, yet all other sensors that feed the computer are putting out the proper signal, and there is good vacuum at the computer box itself.  The car runs fine once past idle and just off idle into early acceleration.  The problem has been diagnosed by a top Chrysler mechanic who also goes back to The Days, and he feels confident that it is the box.  I do not want to send my computer to be rebuilt in case is it mis-built, and prefer to keep it as a spare if possible.  I already have the replacement kit, but I wantg to keep the original system as it is very clean, near mint, with 20,000 miles, original paint, and most components.

Please contact me if you have a #4111278 that you can sell. Many thanks to those who have been sending me tech advice and moral support.  It is much appreciated.
Tom

-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm