Re: IML: Heat riser rotation?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Heat riser rotation?



I did this on my 69 LeBaron. I put a ss hose clamp on the exhaust pipe just below the valve. The screw part of the hose clamp holds the heat riser valve open.

----- Original Message -----
From: therichardsonfamily@xxxxxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: Heat riser rotation?
Date: Thu, 16 Aug 2007 19:00:06 +0000


Dumb question time:

On a '67 440 (from an Imperial - required
content), looking at it from the passenger's
fender, which way does the heat riser rotate as
it opens? I suspect mine does not work
correctly and I want to wire it open.

Dan Richardson
300L Family Heirloom

----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Fred Joslin



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.