According to the '62 parts manual there are two different shoes used depending on whether it is a leading or forward shoe or a following or rear shoe. The part numbers are the same for either front or rear wheel application. The part numbers shown are: Front and Rear Wheel, Front Shoe, 12" Brakes, SY1 = 1857 063 Front and Rear Wheel, Rear Shoe, 12" Brakes, SY1 = 2200 122. The question is, how do you tell them apart? In looking at what came off of my car the only difference I can see is that the brake friction material is slightly offset on two of them compared to the others (about 1/2"). The length of friction material is identical. Since I do not have replacements in hand yet I am wondering if it is possible that I have two shoes that were wrong to start with. NAPA was not able to supply the shoes after all. It looks like Andy Bernbaum will have to be the supplier of last resort. He only shows one part number for Shoe & Lining assembly set, P/N G119. That part number must be his own part number. The years that part number covers is '59 through '62 if his website catalog is correct. Before I put any replacement shoes on the car I would like to be able to identify which is the forward (leading) shoe and which is the rear (following) shoe. Joseph W. Strickland 1021 Vaughan Lane Tioga, TX 76271-2937 ________________________________________ PeoplePC Online A better way to Internet http://www.peoplepc.com ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to iml.webmonster@xxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm