Sent:
Saturday, July 28, 2007 12:55 PM
Subject: RE:
IML: Question on trim clips
Steve: Having just painted my
'62, I have gone through much of this. I did not remove all chrome
because I was only shooting for a #3 restoration and really didn't want to
create more problems by finding rust under the chrome. My car did not
originally have wheel well chrome or rocker panel chrome but I opted to find
some to put on. The wheel well chrome was not a problem but I have not
been able to find the required 3 5/8" rocker panel clips and I have done a
lot of searching. We will be improvising as result...will let
you know how that works...should be done within the next week or
so.
Patricia Anderson
Pruitt
28289 Norris Road
Bozeman, Montana
59718
pruittghl@xxxxxxx (406)
579-0001
-----Original Message-----
From:
mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Steve
Tenpenny
Sent: Saturday, July 28, 2007 10:55 AM
To:
mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: Question on trim
clips
I'm new to the IML and new to my 61
Crown Coupe. In planning and preparation
for a future paint job, I have a
question that has a great bearing on
removing ALL the
trim.
Are ALL of the clips available that
will be needed to replace the trim on my
car, if in fact ALL of the trim is
removed for painting? I have had painters
tell me you can really get yourself in
a mess if the clips can't be had. I
realize taping off is not the ideal
method, but if replacing this huge
amount of trim is going to be a major
problem, I certainly might consider
it.
Any help here will be
appreciated.
Thanks to all,
Steve
Texas
61 Crown Coupe
-----------------
http://www.imperialclub.com -----------------
This message was sent to you by the
Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx
and your response will be
shared with everyone. Private messages
(and attachments) for the
Administrators should be sent to
iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to
http://imperialclub.com/unsubscribe.htm