Re: Re: IML: 440 Hi-Output Vs. 'normal': Thanks Eric!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: IML: 440 Hi-Output Vs. 'normal': Thanks Eric!



Correct. The GTX 440 Was Called A Magnum. It Had 2 1/2" Exhaust With Two Extra Leafs On The Right Rear Springs To Absorb Torque.  I Had A 68 GTX Conv. I Ordered From Vietnam.
 
John B. 67 Crown Convert (single snorkel & exhaust)
----- Original Message -----
Sent: Wednesday, July 25, 2007 11:07 AM
Subject: [Norton AntiSpam] Re: IML: 440 Hi-Output Vs. 'normal': Thanks Eric!

Sir
 
From the  ( 1966 plus ) "normal" 350 horse powered 440 with an single exhaust and the single snorkle air cleaner housing, the "HP" version in Imperials was the exhaust manifolds that permitted the exhaust gasses to exit the heads in an better manner to the dual exhaust system ( dual exhaust pipes to dual mufflers and dual tail-pipes ).  To all that follow power information of the V8 engine, this is the biggest "bang for the buck" item that one can do to add power to any year and any make of "V" designed engine.   Sooo, if you have an Imperial V8 of any year just going from the factories " save a nickel with production cost " with having an single exhaust, to add an profit by charging more to add the dual exhaust, you too will have the same power the clothe top Imperials have.  ( ... Before the days of the Road Runners, GTX's and the such they just had dual exhaust on the exhaust manifold that all vehicles got ).
 
An item to keep in mind is to only have the exhaust pipe the same inside diam of the exhaust manifold to the muffler of the same size.  For the driving that most Imperialist Driver's do, to have an exhaust cross-over pipe connecting the two sides at the notch between the rear  of the engine and the bell-housing is the best set up.  For those who know the Imperial was an lux prestiege car for upper class owners who liked the style of the Imperials road abilities, to have an "X" instead of the cross-over will permit a better power, emission and audio of the basic system.
 
And in all Chrysler Products of the time, if it had dual exhaust, it had an dual snorkel intake housing.
 
With the same 440 cubed 375 horse powered engine  ( Imperial Speakie since lower classed Divisions had the 383 with 335 hp ) which also came an cam shaft of different spec's ( P4529270 ), and valve spgs that had an higher pressure rating.  This permitted the engine to get its power at an higher winding ( rpm ).  Many Imperial owners who are re-building their 413 or 440 cubed Imperial want to use this cam cam assembly but fail to realize the now made MoPar cam assembly P4286675 is better suited to the weight and all of the Imperial.
 
Before the above mentioned 1968 exhaust manifolds and cam assembly used, the 1966-67 440 was rated at 365 hp with just the twin snorkels and dual exhaust.  The 1968 intake manifold was redesigned, the AVS carb's were also changed to the newer style/design of the "spread-bore".
 
The same rebuilding or just retro working person who has an 1966 -1959 Imperial does not know the GTX, Road Runner rear dumping exhaust manifold will never work on the drivers side of the engine.  In order to get the same level of performance they must use a pair of the later to be used 440/400 1972 to 1978 Dodge Truck exhaust manifolds( http://www.1aauto.com/1A/ExhaustManifolds/Dodge/PickupFullSize/1AEEM00081/67558/ ).
 
I re-wrote what Eric was speaking about so that any "newer" Imperialist will have a short speed course of the subject.
 
The 66 Le Baron taking up space here has the "X", true 1969 MoPar Performance Muffler's and Resonator's to keep away that "GTX" sound behind stock exhaust manifolds.  The other car ( 62 Crown two door ) has the 1978-1972 mentioned exhaust manifolds, the cross-over and the same exhaust from the same mufflers to the same resonators to the same infamous "MoPar hook" tail pipes.  They are both as quite as an Imperial at the gates of the local "Country Club" and are able to pull the vintage Air Stream with gusto up the passes here in Colorado.
 
If I ever wear out either of the above I will use the same 1972-78 Dodge 440-400 truck manifolds ( remember 1959 to 1966 Imperials ), an exhaust pipe of the same size from the right to an dual in-let muffler of the same diam on the one side and an equal size exhaust pipe on the driver's side that will have an "lazy S" to the left in-let of the muffler to an single out-let tail pipe.  This designed system has been dyno proven with OEM Dodge SRT trucks that are also performance proven.
 
I do not like added chrome under the hood, flex cooling fans, and the after market radio cut into the dash. Or, tubed after market headers and mufflers that sound much in the same audio levels as an logging truck.
 
About three years ago I spent a lot of time inspecting an OEM 375 horse powered 1968 Imperial Crown four door in Denver.  Since the Imperial was at an "All MoPar Car Event",  the owners just stayed in the eazy chairs and let me look all over it.
 
Some of the other hard to find items on Imperials are the 3.23/3.32:1 ratio Rear Axle assemblies, Sure-Grip, OEM Power Steering Aux Cooler ( looks the same but has an different sized mounting bracket than an NY'r ), OEM Transmission Aux Cooler and the factories spec'd towing hitch.  One needs the Factory Service Manual and that years Parts Catalog  or in towing,  the Towing Suppliment Data, to make sure.
 
Rodger & Gabby
COS
 
 
 
----- Original Message -----
Sent: Wednesday, July 25, 2007 6:50 AM
Subject: Re: IML: 440 Hi-Output Vs. 'normal': Thanks Eric!

In a message dated 7/25/2007 7:46:10 A.M. Eastern Daylight Time, YBSHORE@xxxxxxx writes:
Imperialists:
 
    The only difference I find between the two motors, besides the dual snorkel, are that the TNT came with duals, rated to 375HP, and the 'basic' 440 did not have that exhaust system and was rated at 350HP.  After reading Uncle Rodgers' post's for years about 'getting more out of a car' in regards to a dual exhaust system by matching the outlet to the pipe size,etc., and letting these ol' girls breath, thus giving it the extra 5% to 10% gain, I am wondering if "HP", really meant 'factory stock duals'?
 
Jack
 
The 440 Dual option was not an engine package as such, but a standard 440
with the addition of a dual snorkel air cleaner and dual exhaust. The
horsepower rating for this option raised the standard figure from 350 to
360. The high performance 440 TNT/Magnum/Super Commando differed in these
areas as applied to C-bodies in '68:(Imperial now being a C-body) Carter
carb #4429S in place of Holley, H.D. valve springs, special cam, 268-284-68
in place of standard cam 256-260-32, dual point distributor instead of
single points, upswept exhaust manifolds instead of log type and a windage
tray for the oil pan. This engine was available for any C-body except
Imperials and wagons; which also had the standard 440 twin snorkel/exhaust
option. This was a one year only deal for the Imperial ('68) but was a wagon
option for many years. Chrysler never even bothered to note the option
raised the gross h.p. by 10 in wagon literature but hyped it up in the
Imperial catalog. What a shame the 375 horse 440 was not an option-it sure
should have been. It is my feeling that with the typical fastidious Imperial
owner, the twin snorkel/exhaust thing may fly under his radar, but the
rumpity-rump 375 horse cam would have been too much! BTW- v.i.n. code for
350/360 horse 440- K vs. L for 375 horse 440.

Eric S.
'65 Crown




Get a sneak peek of the all-new AOL.com.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.