I am sending some queries to Hidden Valley Auto Parts and Bob Hoffmeister in hopes of locating the stainless steel trim that goes from the front fender "eyebrow" to the leading edge of the driver's door. Most of these all have been bent due to a broken pin and spring on the detent for the driver's door which allows the door to swing all the way forward and mash the trim and left front fender. My car currently has the trim from the passenger side of another '62 imperial mounted on the driver's side. The cross sectional shape is wrong for the left side of the car and does not look right. This one also was bent due to the same problem while the previous owner had the car. If anyone knows of a good source other than the ones I mentioned above, please let me know. Joe Joseph W. Strickland 1021 Vaughan Lane Tioga, TX 76271-2937 ________________________________________ PeoplePC Online A better way to Internet http://www.peoplepc.com ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to iml.webmonster@xxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm