Re: IML: IML DIGEST- Cutting Curved Glass
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: IML DIGEST- Cutting Curved Glass



Kerry, why can't a waterjet cut these?


On Jul 5, 2007, at 11:34 AM, Kerry Pinkerton wrote:



Welcome Hank.  Been there...done that.  A REALLY BIG PROBLEM.  The side glass is curved.  Can't be cut.  Period.

The custom chopped top curved side glass cars you see either had EXTREMELY expensive custom glass or don't have side glass.

Finding replacement glass is not that difficult or expensive.

Good Luck.

Kerry Pinkerton

From: "Steve B." <Imperial59@xxxxxxxxxxxxxxx>
Subject: IML: Please Welcome hank
Date: Wed, 4 Jul 2007 22:46:45 -0400
New Subscriber(s): hank
Email Address is: fm3roadrunner@xxxxxxxxx
Member Location: northeast,md

Car(s) owned: 1960lebaron this is a custom with a 5 inch chop top ,1959
very rusty crown coupe.

Self-Introduction: my 60 was bought with all the windows brok out so i
decided i should chop the top ,the 59 was bought for parts but i think i
might try to restorse it because it is a very complete car and came with all
the original paperwork.


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx


John Corey
CFIC-Qdrive, 302 Tenth St., Troy, NY 12180 USA
518-272-3565 x201
fax: -272-3582




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.