Re: IML: shackles

From: "Daniel Richardson" <TheRichardsonFamily@xxxxxxxxxxx>
Date: Fri, 22 Jun 2007 22:09:15 -0500

Check out Eaton Springs. They had a new set of leafs with shackles, bolts, etc. for my 300L. Google for their web-site.

Dan

----- Original Message -----

From: MIKE CINDY BECKER

To: mailing-list

Sent: Friday, June 22, 2007 8:24 PM

Subject: IML: shackles

I took my 67 crown convertible to Benz springs in Portland oregon to see about some new leaf springs. they were glad to make some new springs, but said new shackles were not available from their supplier and kind of didn't want to to the job because they were afraid of a shackle breaking. I am going to start looking for shackles anybody any ideas? thanks, mike becker

References:
- IML: shackles
  - From: MIKE CINDY BECKER

Prev by Date: Re: IML: Front End Height Without Tool C-3608: Result front end 5 inches too low!!!
Next by Date: Re: IML: shackles
Previous by thread: IML: shackles
Next by thread: Re: IML: shackles
Index(es):
- Date
- Thread

Back to the Home of the Forward Look Network

Copyright © The Forward Look Network. All rights reserved.
Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.