Re: IML: 1956 Horn Ring//2

[randalpark@xxxxxxx]

This is good news as I have kept the two broken ones that I have just 
in case some one came up with a solid/quality repair. Can you disclose 
a price range?

Paul W.

-----Original Message-----
From: YBSHORE@xxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Thu, 3 May 2007 4:45 PM
Subject: Re: IML:  1956 Horn Ring//2

In a message dated 5/3/2007 8:05:25 P.M. Eastern Daylight Time, 
randalpark@xxxxxxx writes:
All 1955 and 1956 Chryslers and Imperials have the same horn ring.

Imperialists,
 
    I found the right welder can fix these rings and the fix is far 
better than any epoxy combination you will EVER find......my local 
welder in fact just fixed my '55 ring and there is so much 'meat' on 
the ring and cross member, even ground for welding and sanded to 
dipping capability, it would easily pass as driver quality...and 
does!!!  The dip shall come next season....
 
ybshore



--------
See what's free at AOL.com.


________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free 
from AOL at AOL.com.
=0


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm