Re: IML: power window motors

[<dansgarage@xxxxxxxxxxxx>]

Hi George....the silicone lub you used for your '64's window tracks, was it the 'spray' kind or the 'comes-in-a-tube/can' kind? and does it matter if you use lithium grease/white lithium or ven bearing greaase in the motor gears once you take the motor apart??/
Thanks a bunch!!
Dan Melnik

---- GeoNort@xxxxxxx wrote: 

=============
I refurbished the window motors on both of my 64 Imperials. They usually 
don't need to be rebuilt just get the old hard grease out of the gears & put new 
soft grease in. I had two that didn't move at all till I cleaned them. The 
tracks & gears inside the door should be lubed also. I used silicone lube in the 
tracks. Even on a good day those motors aren't the fastest things around. 
especially in the up mode. Especially in the coupe which has a larger heavier 
window than a 4 door. It is not particularly hard to do just needs a bit of 
flexibility to get the motors out & in.
 
George
 
64 Crown Coupe
64 LeBaron
67 Lebaron



************************************** See what's free at http://www.aol.com.



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm