OK Paul, I will ask 440source.com for the exact dimensions of their dampers then. Thanks for warning me! Robert Op Di, 9 januari, 2007 11:19 pm, schreef DR CHALLENGER: > Make sure they work with stock pulleys, some of Fuild Dampeners are > thicker. > > >> From: "rob van der Es" <r.vdes@xxxxxxxxxxxxxxx> >> >>> >> Thanks Paul, >> >> >> I am still not sure what to do, both dampers on the link I provided >> (the >> first and second damper on that page) are SFI approved so I am sure they >> will be premium quality. But for only $10 more or so, I will have me a >> fluid damper that softens vibrations on a much broader rpm range. >> >> So what should I do???? >> >> >> Robert >> >> >> >> >> Op Di, 9 januari, 2007 6:54 pm, schreef randalpark@xxxxxxx: >> >>> For what it's worth, I also suggest rebuilding the original or >>> replacing it with the same type. >>> >>> Paul W. >>> >>> >>> >>> > > > > > ----------------- http://www.imperialclub.com ----------------- > This message was sent to you by the Imperial Mailing List. Please > reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared > with everyone. Private messages (and attachments) for the Administrators > should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to > http://imperialclub.com/unsubscribe.htm > > > ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm